Rig: Ocean Star

Name Ocean Star
Owner Diamond Offshore Drilling
Manager Diamond Offshore Drilling
Rig Type Semisub
Sub Type Deepwater Floater
Jackup Type --
Max Water Depth (ft) 5500
Max Drill Depth (ft) 30000
Dimensions (ft) 336 x 290 x 128
Leg Length (ft) --
Competitive Yes

Current Location

Country --
Region --

Drilling Equipment

Drawworks Type National Oilwell Varco E-3000
Drawworks HP 9000
Mud Pumps Type National Oilwell Varco 12-P-160 Triplex
Top Drive National Oilwell Varco TDS-4S
Hookload Capacity (lbs) 1300000

Rig Construction Details

Rig Design Odeco
Rig Model Ocean Victory (Enhanced)
Year Built 1974
Country of Build USA
Yard Name Avondale Shipyard
Group Yard Name Odgen Corporation

Rig Contract Details

Operating Status Retired
Operator

News

7 Feb 2014

QGEP announces result of Atlanta well test in Brazil

QGEP Participações S.A. ("Company") announced on February 5th the conclusion of the drilling and testing of the first horizontal well (7-ATL-2HP-RJS) of the Early Production System (EPS) of the Atlanta Field. Located in Block BS-4, Atlanta is a post-salt oil field 185 km off the coast of the city of Rio de Janeiro in the Santos Basin in water depth of approximately 1,500 meters. The well was drilled to a horizontal section length of 750m and a diameter of 9.5 inches. It encountered a very high porosity sand reservoir, with average porosity of 38%. The horizontal part of the well was then cased with screens and packed with gravel, which will maximize oil productivity while preventing the movement of reservoir sand into the borehole and production equipment. A Drill Stem Test (DST) was then successfully performed with two different flow periods, the first one more restricted in order to collect bottom hole samples of oil and gas, and the second flow with less restrictions. The two flow periods produced flow rates of 1,250 barrels of oil per day (bopd) and over 5,000 bopd, respectively. These flow rates were subject to considerable constraints associated with the DST set up and limited capacity of the surface facilities, such as storage, short term flaring limitations and low capacity electrical submersible pump (ESP). Furthermore, the test confirmed a Productivity Index (PI) higher than was estimated during reservoir simulation studies. These excellent results obtained with the drilling, completion and DST indicated that production rates of this well, once brought onstream under normal operation conditions and equipped with a full capacity ESP, will be closer to the high end of estimated 6,000-12,000 bopd range. The results of the tests also confirmed the expected characteristics of the reservoir and the oil, with high permeability and 14º API. As laid out in the development schedule for Atlanta, the Consortium will initiate immediately the drilling of the second horizontal well of the EPS. In the coming days, the Company will launch the bidding process for FPSOs of different capacities, covering both potential scenarios: continuing with the EPS or proceeding directly to Full Development. The decision on which FPSO will be hired will be based on the results of the tender and the impact on the economics of the project. In both scenarios, first oil at Atlanta is expected in late 2015 or early 2016. "Production test results came in at the high end of our expected range, confirming the potential of the Atlanta Field," said Danilo Oliveira, QGEP’s Production Director. "Our experienced team used cutting edge techniques and equipment, to carry out a highly successful test, demonstrating the technical know-how that we have built within QGEP. We will continue to apply this know-how as we develop the Field." Queiroz Galvão Exploração e Produção S.A. is the operator of the Block with a 30% ownership; other consortium members include OGX Petróleo e Gás S.A. (40%) and Barra Energia do Brasil Petróleo e Gás Ltda. (30%).

About The Rigs Website

What you are seeing is a selection of sample rig information from the Infield Rigs database. If you would like to see more detailed information regarding the unit, please click here to contact a member of the Infield Rigs Team or call us on +44 207 423 5000

Feedback